Black Box LGC5210A network media converter 1000 Mbit/s
Black Box LGC5210A. Maximum data transfer rate: 1000 Mbit/s, Converter input interface: 1000Base-T, Ethernet interface type: Gigabit Ethernet. Product color: Black. Fiber optic connector: SFP, Connectivity technology: Wired. Input voltage: 100 - 240 V, AC input frequency: 50 - 60 Hz. Width: 3.62" (92 mm), Depth: 3.82" (97 mm), Height: 0.787" (20 mm)
SKU:
3298738
Manufacturer part number:
LGC5210A
MSRP:
$619.28
$565.69
Quick FactsFeatures two 10-/100-/1000-Mbps copper ports and one SFP port that can be customized to the interface of your choice through the use of standard SFPs.
Both UTP ports are auto-sensing with auto MDI/MDI-X; one UTP port supports 802.11at PoE+.
Rugged metal chassis.
Further DetailsActs as power sourcing equipment (PSE) on the copper side to power PoE+ devices.
Features an extended temperature range when used with DC terminal-block power.
This tough media converter is the ideal way extend your network over fiber and also power a PoE device. Use it to link to faraway PoE devices such as IP security cameras, wireless access points, and VoIP phones.
The media converter features two autosensing 10/100/1000 UTP ports plus an SFP port that can be customized to virtually any interface—including multimode fiber, single-mode fiber, or Gigabit copper—through the use of a standard SFP. One UTP port supports 802.3at Power over Ethernet, enabling it to power a PoE+ PD device; the other is a straightforward Ethernet port, which can be used for network expansion.
The Gigabit PoE+ Media Converter can be powered three ways: from an AC power supply (LGC5210-PS, included), via the DC power jack, or via the DC terminal block. When used with DC power to the terminal block, the converter supports an extended operating temperature range of +32 to +158° F (0 to +70° C).
The converter requires only one power source to power both the converter and a PoE+ device; you can position the PoE+ device up to 100 meters (328 feet) away from the converter, enabling flexible placement of wireless APs and security cameras. A pair of input terminals and output terminals enables you to cascade DC power in a DIN rail installation (optional DIN Rail Clip (LXC-DR) is sold separately).
- Features two 10-/100-/1000-Mbps copper ports and one fiber port.
- Both UTP ports are autosensing with Auto MDI/MDI-X; both UTP ports support 802.3at PoE+.
- Acts as power sourcing equipment (PSE) on the copper side to power PoE+ devices.
- Features an extended temperature range when used with DC terminal-block power.
- Rugged metal chassis.
