Cisco® Catalyst® 2960-X Series Switches are fixed-configuration, stackable Gigabit Ethernet switches that provide enterprise-class access for campus and branch applications (Figure 1). Designed for operational simplicity to lower total cost of ownership, they enable scalable, secure and energy-efficient business operations with intelligent services and a range of advanced Cisco IOS® Software features. - 24 or 48 Gigabit Ethernet ports with line-rate forwarding performance. - Gigabit Small Form-Factor Pluggable (SFP) or 10G SFP+ uplinks. - FlexStack Plus for stacking of up to 8 switches with 80 Gbps of stack throughput (optional). - Power over Ethernet Plus (PoE+) support with up to 740W of PoE budget. - Reduced power consumption and advanced energy management features. - USB and Ethernet management interfaces for simplified operations. - Application visibility and capacity planning with integrated NetFlow-Lite. - LAN Base or LAN Lite Cisco IOS® software features. - Enhanced limited lifetime warranty (E-LLW) offering next-business-day hardware replacement.
Products specifications
| Attribute name | Attribute value |
|---|
| Number of VLANs | 8 |
| Depth | 14.5" |
| Weight | 12.6 lbs |
| Switching capacity | 216 Gbit/s |
| Throughput | 95.2 Mpps |
| Width | 17.5" |
| Height | 1.77" |
| Switch Type | Managed |
| Stackable | Y |
| Built-in processor | Y |
| Power supply included | Y |
| SFP+ module slots quantity | 2 |
| Broadcast storm control | Y |
| DHCP features | DHCP server |
| Link aggregation | Y |
| Access Control List (ACL) | Y |
| SSH/SSL support | Y |
| IGMP snooping | Y |
| MIB support | Y |
| Rate limiting | Y |
| Form factor | 1U |
| Product color | Black |
| Safety | 6000 W |
| Mean time between failures (MTBF) | 325780 h |
| Noise level | 57 dB |
| Memory type | DRAM |
| Internal memory | 512 MB |
| Full duplex | Y |
| LED indicators | Y |
| On/off switch | Y |
| Networking standards | IEEE 802.1D,IEEE 802.1Q,IEEE 802.1ab,IEEE 802.1p,IEEE 802.1s,IEEE 802.1w,IEEE 802.1x,IEEE 802.3,IEEE 802.3ab,IEEE 802.3ad,IEEE 802.3ae,IEEE 802.3af,IEEE 802.3ah,IEEE 802.3at,IEEE 802.3u,IEEE 802.3x,IEEE 802.3z |
| Processor frequency | 600 MHz |
| Console port | RJ-45 |
| Fiber optic connector | SFP+ |
| Auto MDI/MDI-X | Y |
| Rack mounting | Y |
| MAC address table | 16000 entries |
| Power over Ethernet (PoE) ports quantity | 24 |
| USB 2.0 ports quantity | 2 |
| Basic switching RJ-45 Ethernet ports quantity | 24 |
| Basic switching RJ-45 Ethernet ports type | Gigabit Ethernet (10/100/1000) |
| Power consumption (typical) | 52.3 W |
| AC input frequency | 50 - 60 Hz |
| AC input voltage | 100 - 240 V |
| Number of power supply units | 1 |
| Total Power over Ethernet (PoE) budget | 370 W |
| Redundant power supply (RPS) support | Y |
| Multicast support | Y |
| Jumbo frames support | Y |
| 10G support | Y |
| Quality of Service (QoS) support | Y |
| VLAN support | Y |
| Spanning tree protocol | Y |
| Non-operating altitude | 802.1x RADIUS, SNMP |
| Operating temperature (T-T) | -5 - 40 °C |
| Storage temperature (T-T) | -25 - 70 °C |
| Operating relative humidity (H-H) | 10 - 95 % |
| Storage relative humidity (H-H) | 10 - 95 % |
| Operating altitude | 0 - 118110.2" |
| Flash memory | 128 MB |
| Web-based management | Y |
| Switch layer | L2 |
| Security algorithms | 802.1x RADIUS,SSH |
| Management protocols | SNMP v1/v2c/v3, RMON I/II |
| Power over Ethernet (PoE) | Y |