iStorage datAshur Pro USB flash drive 64 GB USB Type-A 3.2 Gen 1 (3.1 Gen 1) Blue

Introducing the datAshur PRO
The datAshur PRO USB 3.2 Gen 1 flash drive is a PIN-authenticated, AES-XTS 256-bit hardware encrypted flash drive that securely encrypts, stores and protects data to military standards.

The datAshur PRO allows you to safeguard valuable and sensitive data to ensure compliance with stringent data protection and confidentiality regulations and directives, such as GDPR, HIPAA, SOX, CCPA and more.

Easy to use
Simply enter a 7-15 digit PIN to authenticate and use as a normal flash drive.

When the drive is disconnected, all data is encrypted (full disk encryption) using AES-XTS 256-bit hardware encryption (no software required).

FIPS 140-2 Level 3 certified, tamper proof & evident design
All data stored on the datAshur PRO is encrypted using FIPS PUB 197 validated, AES-XTS 256-bit hardware encryption. All components incorporated within the datAshur PRO are completely covered by a layer of super tough epoxy resin, which is virtually impossible to remove without causing permanent damage to the components. The drive is also designed to be tamper evident making it obvious to the User if it has been pried open and tampered with.

Wear resistant keypad
The onboard keypad is covered with a layer of polymer coating that protects the keys and hides key usage to avoid tipping off a potential hacker to commonly used keys.

Government certified
The datAshur PRO has been validated to the following government accreditation standards: FIPS 140-2 Level 3, NLNCSA DEP-V & NATO Restricted level.

No need to worry about spills
The drive’s IP57 accreditation means it will survive being submerged under 1m of water for 30 minutes and deemed fit enough to withstand dust, dirt and sand.

Independent User & Admin PINs
Which makes it perfect for corporate and government deployment. If the User forgets their PIN, the drive can be unlocked using the Admin PIN. The Administrator can then allow the User to set a new User PIN.

Read only (write protect) - Dual Mode
Both the Admin and User can configure the datAshur PRO as a read only (write protect) drive. If configured by the Admin, the feature cannot be modified or disabled by the User, allowing the Admin to pre-provision a drive with pre-loaded content as read-only for the User.

Transfer your files in seconds
Lightning fast backwards compatible USB 3.2 Gen 1 data transfer speeds.

OS & Host independent - works across any host and embedded systems
No software required; the drive will work on any device with a USB port.

Compatible with: MS Windows, macOS, Linux, Android, Chrome, Thin Clients, Zero Clients, Embedded Systems, Citrix and VMware

Brute force hack defence mechanism
Intelligently programmed to protect against all forms of brute force attacks.

10 attempts
If the user PIN is entered incorrectly 10 consecutive times, the user PIN will be deleted. All your data will remain on the device but now you can only access it by entering the admin PIN.

However,
if you enter the admin PIN incorrectly 10 consecutive times, the PIN, encryption key and all data will be lost forever.

The device will revert back to factory default settings and will need to be formatted before use.

Auto-lock
Automatically locks when unplugged from the host computer or when power to the USB port is turned off. It can also be set to automatically lock after a predetermined amount of time.

Drive Reset
Deletes the encrypted encryption key, all PINs and renders all data as lost forever. The drive can then be redeployed which randomly generates a new encrypted encryption key, a process that can be repeated as many times as required.

Whitelisting on networks
Configured with a unique VID/PID and internal/external serial number with barcode, allowing easy integration into standard end-point management software (white-listing), to meet internal corporate requirements.