Other

Cisco DWDM-SFP10G-55.75=. Maximum data transfer rate: 10000 Mbit/s, Interface type: SFP+, Fiber optic connector: LC. Power consumption (typical): 1.8 W. Width: 0.528" (13.4 mm), Depth: 0.335" (8.5 mm), Height: 2.22" (56.5 mm)

Cisco ONS 15216

Cisco DWDM-XFP-C=. SFP transceiver type: Fiber optic, Maximum data transfer rate: 10000 Mbit/s, Interface type: XFP. Certification: MSA

Cisco 5508. Management protocols: SNMP v1, v2c, v3, Telnet, TFTP, SNTP, HTTP/HTTPS. Networking standards: IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, 802.11d, IEEE 802.11e, IEEE 802.11h, IEEE 802.11k, IEEE..., Data transfer rate: 1 Gbit/s, Cabling technology: 10/100/1000Base-T(X). Security algorithms: WPA, WPA2, Authentication method: IEEE 802.1X, RADIUS, TACACS. Power consumption (typical): 115 W, Input voltage: 100 - 240 V, Input frequency: 50/60 Hz. Weight: 20.1 lbs (9.1 kg), Dimensions (WxDxH): 17.3 x 21.2 x 1.75" (440 x 539 x 44.5 mm)

Cisco A9K-MPA-2X10GE. Ethernet LAN data rates: 10000 Mbit/s, Networking standards: IEEE 802.3ae. Fiber optic connector: XFP, Fiber ethernet cabling technology: 10GBASE-R. Compatibility: Cisco ASR 9000. Weight: 24.7 oz (700 g)

APC InfraStruXure Central Standard Pilot Pak. Non-operating altitude: 0 - 354330.7" (0 - 9000 m). Dimensions (WxDxH): 21.5 x 19 x 1.73" (546 x 483 x 44 mm), Weight: 21.1 lbs (9.55 kg)

Cisco X6748-SFP, Refurbished. Fiber optic connector: SFP, Fiber type: Multi-mode, Fiber ethernet cabling technology: 1000BASE‑LH, 1000BASE‑LX, 1000BASE‑SX, 1000BASE‑ZX. Data transfer rate: 1 Gbit/s. Hot-Plug support: SFP, Buffer size per port: 1.17 MB. Safety: UL 1950, CSA C22.2 No.950, EN 60950, EN 60825-1 IEC 60950, IEC 60825-1, TS 001, CE marking, AS/NZS..., Electromagnetic compatibility: FCC Part 15 (CFR 47) Class A, VCCI, EN55022, EN55024, CISPR 22, CE marking, AS/NZS 3548. Dimensions (WxDxH): 14 x 16 x 1.18" (356 x 406 x 30 mm)

Cisco EPA-18X1GE=. Ethernet interface type: Gigabit Ethernet, Ethernet LAN data rates: 1000 Mbit/s

Cisco ONS-SC+-10G-ZR=. Interface type: SFP+

Cisco N9K-X9464PX, Refurbished. Ethernet interface type: 40 Gigabit Ethernet, Ethernet LAN data rates: 10000,40000 Mbit/s. Fiber optic connector: QSFP+, SFP, SFP+. Compatibility: N9K-C9504-FM, N9K-C9508-FM, N9K-C9516-FM. Power consumption (typical): 160 W

Cisco C6800-48P-TX, Refurbished. Ethernet interface type: Gigabit Ethernet, Ethernet LAN data rates: 10,100,1000 Mbit/s, Copper ethernet cabling technology: 1000BASE-T. Power consumption (typical): 405 W. Dimensions (WxDxH): 14 x 16 x 1.18" (356 x 406 x 30 mm)

Cisco Optical Preamplifier

Cisco Nexus 3064-32T. Switch type: Managed, Switch layer: L2/L3. Basic switching RJ-45 Ethernet ports type: 10G Ethernet (100/1000/10000), Basic switching RJ-45 Ethernet ports quantity: 32, Installed SFP+ modules quantity: 4, USB 2.0 ports quantity: 1. MAC address table: 128000 entries, Switching capacity: 1280 Gbit/s. Networking standards: IEEE 802.1ab, IEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1s, IEEE 802.1w, IEEE 802.3ab, IEEE.... Rack mounting, Form factor: 1U

Cisco EPA-18X1GE. Ethernet interface type: Gigabit Ethernet, Ethernet LAN data rates: 1000 Mbit/s

Cisco 5508 Series Wireless Controller for up to 25 APs. Safety: UL 60950-1:2003, EN 60950:2000. Management protocols: SNMP v1, v2c, v3, Telnet, TFTP, SNTP, HTTP, Data link protocols: IEEE 802.11a, 802.11b, 802.11g, 802.11d, WMM/802.11e, 802.11h, 802.11n. Data transfer rate: 0.1 Gbit/s, Cabling technology: 10/100/1000Base-T(X). Security algorithms: WPA, Authentication method: IEEE 802.1X, RADIUS, TACACS. Power requirements: 100-240. 50/60, Power consumption (typical): 115 W, Heat dissipation: 392 BTU/h

Cisco WS-F6700-DFC3CXL. Connectivity technology: Wired. Internal memory: 1024 MB, Compatibility: Cisco Catalyst 6700

Cisco ONS-XC-10G-L2=. SFP transceiver type: Fiber optic, Maximum data transfer rate: 10000 Mbit/s, Interface type: XFP