Bosch SS-SRK alarm lighting Fixed

SS‑SRK Two‑wire, Wall‑mount Outdoor Strobe (red)

The SS‑SRK Strobe, one of the System Sensor SpectrAlert Advance notification appliances, simplifies installations with features such as plug‑in designs, instant feedback messages to ensure correct installation of individual devices, and field‑selectable candela settings. This strobe is designed for outdoor wall‑mounted applications. SpectrAlert products can be used in either DC or full‑wave rectified (FWR) systems (12 V or 24 V). If required, the SSMDL module can be used to provide synchronization.

Functions

When wired as a primary‑signaling notification appliance, the strobe complies with the Americans with Disabilities Act (ADA) requirements for visible signaling appliances, flashing at 1 Hz over the strobe's entire operating voltage range. The strobe light consists of a xenon flash tube and associated lens and reflector system. For 24 V applications, the total number of strobes on a single NAC must not exceed 40, with a maximum loop resistance of 120 Ω. For 12 V applications, the total number of strobes must not exceed 12, with a maximum loop resistance of 30 Ω.

 

• Plug‑in design with tamper-resistant, rainproof (NEMA 3R) construction
• Field‑selectable settings of 15 cd, 15/75 cd, 30 cd, 75 cd, 95 cd, 110 cd, and 115 cd
• Shorting spring on mounting plate for continuity check before installation
• Outdoor wall mounting