The TN-SFP-XXX Small Form Factor Pluggable (SFP) transceivers are designed for bi-directional serial optical data communications such as Gigabit Ethernet or Fiber Channel and speeds up to 2.5Gbps.
The device is designed for use in Switches and routers compatible with Small Form Factor Pluggable Multi-Sourcing Agreement (MSA).
ALL modules also offer comprehensive digital diagnostic capability (DMI)[unless otherwise noted].
Note: Per Cisco Systems’ literature, the Cisco switches with SFP slots do not accept modules other than Cisco's own SFPs. The Cisco switch identifies the manufacturer ID along with the part number and blocks operations to this port for non-Cisco interfaces. Other major SFP switch manufacturers do not indicate in their literature that such restrictions are imposed.
Transition Networks' SFP units fully comply with Multi-Sourcing Agreement (MSA). This compliance allows Transition Networks SFP modules to be used on other MSA-compliant SFP platforms without any problems.
Products specifications
| Attribute name |
Attribute value |
|
Width
|
0.66 W |
|
Depth
|
LX |
|
Height
|
0.315" |
|
Certification
|
1310 nm |
|
Interface type
|
SFP |
|
Fiber optic connector
|
LC |
|
SFP transceiver standard
|
LX |
|
Maximum transfer distance
|
393700.8" |
|
Networking standards
|
IEEE 802.3z |
|
SFP transceiver type
|
Fiber optic |
|
Maximum data transfer rate
|
1000 Mbit/s |
|
Single-mode fiber (SMF) supported
|
Y |
|
Wavelength
|
1310 nm |
|
Power consumption (typical)
|
-3 dBmW |
