Per Cisco Systems literature, the Cisco switches with SFP slots do not accept modules other than Cisco’s own SFPs. The Cisco switch identifies the manufacturer ID along with the part number and blocks operations to this port for non-Cisco interfaces. Other major SFP switch manufacturers do not indicate in their literature that such restrictions are imposed. Transition Networks SFP units fully comply with Multi-Sourcing Agreement (MSA). This compliance allows Transition Networks SFP modules to be used on other MSA-compliant SFP platforms without any problems.
- Hot-Pluggable SFP Footprint Duplex LC Optical Transceiver
- Digital Diagnostic Function
- Class 1 Laser International Safety Standard IEC-60825 Compliant
- Compatible with SFP Multi-Sourcing Agreement (MSA)
TN-SFP-OC3x SFP modules:
- Compliant with 100BASE-FX
- Compliant with Intermediate-Reach SONET OC-3/SDH STM-1 (S-1.1)
Products specifications
| Attribute name |
Attribute value |
|
Height
|
-10 - 85 °C |
|
Width
|
0.512" |
|
Depth
|
2.17" |
|
Certification
|
1310 nm |
|
Rx power (max)
|
-20 dBmW |
|
Rx power (min)
|
-34 dBmW |
|
SFP transceiver type
|
-8 dBmW |
|
Interface type
|
SFP |
|
Fiber optic connector
|
LC |
|
SFP transceiver standard
|
LX |
|
Maximum transfer distance
|
1181102.4" |
|
Networking standards
|
IEEE 802.3 |
|
Tx power (max)
|
-8 dBmW |
|
Maximum data transfer rate
|
100 Mbit/s |
|
Single-mode fiber (SMF) supported
|
Y |
|
Wavelength
|
1310 nm |
|
Tx power (min)
|
-14 dBmW |
|
Power consumption (typical)
|
-3 dBmW |
|
Operating temperature (T-T)
|
-10 - 85 °C |
