Note: Per Cisco Systems’s literature, the Cisco switches with SFP slots do not accept modules other than Cisco’s own SFPs. The Cisco switch identifies the manufacturer ID along with the part number and blocks operations to this port for non Cisco interfaces. Other major SFP switch manufacturers do not indicate in their literature that such restrictions are imposed.
Transition Networks’s SFP units fully comply with Multi-Sourcing Agreement(MSA). This compliance allows Transition Networks SFP modules to be used on other MSA-compliant SFP platforms without any problems.
Products specifications
| Attribute name |
Attribute value |
|
Width
|
0.512" |
|
Depth
|
2.17" |
|
Height
|
0.315" |
|
Maximum data transfer rate
|
IEEE 802.3 |
|
Interface type
|
1450 nm |
|
Single-mode fiber (SMF) supported
|
1430 nm |
|
Fiber optic connector
|
1410 nm |
|
SFP transceiver standard
|
FX |
|
Wavelength
|
1370 nm |
|
SFP transceiver type
|
Fiber optic |
|
Maximum transfer distance
|
3149606.3" |
|
Power consumption (typical)
|
-3 dBmW |
|
Input voltage
|
3.3 V |
|
Operating temperature (T-T)
|
9 - 30 V |
