Per Cisco Systems’s literature, the Cisco switches with SFP slots do not accept modules other than Cisco’s own SFPs. The Cisco switch identifies the manufacturer ID along with the part number and blocks operations to this port for non Cisco interfaces. Other major SFP switch manufacturers do not indicate in their literature that such restrictions are imposed.
Transition Networks’s SFP units fully comply with Multi-Sourcing Agreement(MSA). This compliance allows Transition Networks SFP modules to be used on other MSA-compliant SFP platforms without any problems.
- Course Wavelength Division Multiplexing (CWDM) ITU grid Compliant Wavelengths
- Hot-Pluggable SFP Footprint LC Optical Transceiver
- Digital Diagnostic Function
- Class 1 Laser International Safety Standard IEC-60825 Compliant
- Compatible with Small Form Factor Pluggable Multi-Sourcing Agreement (MSA)
Products specifications
| Attribute name |
Attribute value |
|
Width
|
0.512" |
|
Depth
|
2.17" |
|
Height
|
0.315" |
|
Certification
|
MSA |
|
Hot-swap
|
Y |
|
Plug and Play
|
Y |
|
Maximum data transfer rate
|
100 Mbit/s |
|
Interface type
|
SFP |
|
Fiber optic connector
|
LC |
|
SFP transceiver standard
|
FX |
|
Maximum transfer distance
|
3149606.3" |
|
Wavelength
|
1510 nm |
|
Networking standards
|
IEEE 802.3, IEEE 802.3u |
|
SFP transceiver type
|
Fiber optic |
|
Single-mode fiber (SMF) supported
|
Y |
|
Auto MDI/MDI-X
|
Y |
|
Power consumption (typical)
|
-3 dBmW |
|
Input voltage
|
3.3 V |
|
Storage relative humidity (H-H)
|
10 - 80 % |
|
Operating temperature (T-T)
|
0 - 70 °C |
|
Storage temperature (T-T)
|
-40 - 85 °C |
|
Operating relative humidity (H-H)
|
10 - 80 % |
