Tripp Lite PDUMH20ATS power distribution unit (PDU) 16 AC outlet(s) 1U Black

Tripp Lite PDUMH20ATS. PDU types: Metered, Switched, Rack capacity: 1U, Type: Single-phase. AC outlets quantity: 16 AC outlet(s), AC outlet types: NEMA 5–15R, NEMA 5–20R, Power plug: NEMA L5-20P. Cable length: 144.1" (3.66 m). Nominal input voltage: 120 V, Maximum current: 20 A, AC input frequency: 50/60 Hz. Width: 17.5" (444.5 mm), Depth: 14.5" (368.3 mm), Height: 1.75" (44.4 mm)
Manufacturer: Tripp Lite
SKU: 6335946
Manufacturer part number: PDUMH20ATS
UPC: 0037332261373
MSRP: $741.32
$536.44
Single-Phase 20A ATS PDU Distributes and Monitors Network-Grade Power in Real Time This metered PDU provides real-time local reporting of the total load level via its built-in digital current metering. Ideal for network IT applications, small computer rooms and other equipment rack applications, the PDUMH20ATS features 16 NEMA 5-15/20R 120V outlets for connecting equipment. Dual 12-foot (3.7-meter) power cords with NEMA L5-20P inputs (two 5-20P adapters are included) connect to separate primary and secondary mains circuits, backup generators, UPS systems or utility power grids, including out-of-phase sources. Switches from Primary to Secondary Power Source in Milliseconds Automatic transfer switching (ATS) allows the PDU to switch to the secondary source within 2–7 milliseconds, should the primary source fail or become unstable, to ensure your connected equipment operates without interruption. An on-board ATS processor constantly evaluates the power quality of both input sources. It prevents switching if the secondary source is unavailable or of lower quality than the primary source. Digital Load Meter Helps Prevent Potentially Expensive Overloads A digital ammeter reports the total load for all connected equipment. Monitoring amperage helps ensure load levels remain well below maximum capacity with no danger of overload that could lead to costly downtime or damaged equipment. Maintaining proper load levels, even while adding new equipment, can keep your TCO (total cost of ownership) low. Mounts into 1U of Rack Space or on a Wall Use the included mounting hardware to install the all-metal housing into 1U of space in an EIA-standard 19-inch rack. You may also use the mounting brackets to secure the PDU to a wall or under a counter. TAA-Compliant for GSA Schedule Purchases The PDUMH20ATS is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.
Single-Phase 20A ATS PDU Distributes and Monitors Network-Grade Power in Real Time This metered PDU provides real-time local reporting of the total load level via its built-in digital current metering. Ideal for network IT applications, small computer rooms and other equipment rack applications, the PDUMH20ATS features 16 NEMA 5-15/20R 120V outlets for connecting equipment. Dual 12-foot (3.7-meter) power cords with NEMA L5-20P inputs (two 5-20P adapters are included) connect to separate primary and secondary mains circuits, backup generators, UPS systems or utility power grids, including out-of-phase sources. Switches from Primary to Secondary Power Source in Milliseconds Automatic transfer switching (ATS) allows the PDU to switch to the secondary source within 2–7 milliseconds, should the primary source fail or become unstable, to ensure your connected equipment operates without interruption. An on-board ATS processor constantly evaluates the power quality of both input sources. It prevents switching if the secondary source is unavailable or of lower quality than the primary source. Digital Load Meter Helps Prevent Potentially Expensive Overloads A digital ammeter reports the total load for all connected equipment. Monitoring amperage helps ensure load levels remain well below maximum capacity with no danger of overload that could lead to costly downtime or damaged equipment. Maintaining proper load levels, even while adding new equipment, can keep your TCO (total cost of ownership) low. Mounts into 1U of Rack Space or on a Wall Use the included mounting hardware to install the all-metal housing into 1U of space in an EIA-standard 19-inch rack. You may also use the mounting brackets to secure the PDU to a wall or under a counter. TAA-Compliant for GSA Schedule Purchases The PDUMH20ATS is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.
Products specifications
Attribute nameAttribute value
Master (outer) case width23.3"
Master (outer) case height8517.62.0090
Depth14.5"
Weight12.2 lbs
MountingHorizontal
Cable Length144.1"
TypeSingle-phase
Rack mount kitY
Master (outer) case weight20.7 lbs
Master (outer) case length20.1"
Country of OriginTaiwan
Width17.5"
Height1.75"
Housing MaterialMetal
DisplayLCD
Design
PDU typesMetered, Switched
Technical details
Product colorBlack
Sustainability certificatesRoHS
Sustainability complianceY
Features
Rack capacity1U
LED indicatorsY
Packaging data
Package depth20.1"
Package weight20.7 lbs
Package width23.3"
Package height5.4"
Logistics data
Quantity per master (outer) case1 pc(s)
Packaging content
ManualY
Cables includedAC
Other features
Nominal output voltage100 - 127 V
Ports & interfaces
AC outlets quantity16 AC outlet(s)
AC outlet typesNEMA 5–15R, NEMA 5–20R
Power plugNEMA L5-20P
Serial ports quantity1
Power
Maximum power2030 W
Maximum current20 A
Nominal input voltage120 V
AC input frequency50/60 Hz
Operational conditions
Storage temperature (T-T)120 V
Operating relative humidity (H-H)5 - 95 %
Operating altitude0 - 118110.2"
*
*
*
Products specifications
Attribute nameAttribute value
Master (outer) case width23.3"
Master (outer) case height8517.62.0090
Depth14.5"
Weight12.2 lbs
MountingHorizontal
Cable Length144.1"
TypeSingle-phase
Rack mount kitY
Master (outer) case weight20.7 lbs
Master (outer) case length20.1"
Country of OriginTaiwan
Width17.5"
Height1.75"
Housing MaterialMetal
DisplayLCD
Design
PDU typesMetered, Switched
Technical details
Product colorBlack
Sustainability certificatesRoHS
Sustainability complianceY
Features
Rack capacity1U
LED indicatorsY
Packaging data
Package depth20.1"
Package weight20.7 lbs
Package width23.3"
Package height5.4"
Logistics data
Quantity per master (outer) case1 pc(s)
Packaging content
ManualY
Cables includedAC
Other features
Nominal output voltage100 - 127 V
Ports & interfaces
AC outlets quantity16 AC outlet(s)
AC outlet typesNEMA 5–15R, NEMA 5–20R
Power plugNEMA L5-20P
Serial ports quantity1
Power
Maximum power2030 W
Maximum current20 A
Nominal input voltage120 V
AC input frequency50/60 Hz
Operational conditions
Storage temperature (T-T)120 V
Operating relative humidity (H-H)5 - 95 %
Operating altitude0 - 118110.2"
Product tags
  • (56515)