Tripp Lite's SMART 700HG offers medical-grade UPS protection with built-in line interactive voltage regulation, intelligent monitoring and unattended shutdown capability. UL 60601-1 listed as medical electrical equipment. Built-in isolation transformer with Faraday shield removes common mode noise while maintaining full AC surge suppression in all modes. Resistant to electrostatic discharge. Includes high quality hospital-grade plug and outlets. 700VA power handling capacity supports computers, inter-networking equipment and other critical loads during commercial power failures. Line interactive voltage regulation corrects brownouts as low as 81V and overvoltages as high as 143 back to normal 120V levels, saving battery reserves for use only during complete power failures. Includes 4 outlets, diagnostic LEDs and built-in USB & RS-232 communications ports that work with downloadable PowerAlert Software and cabling to provide automatic unattended shutdown of connected network and PC applications. - Ideal UPS protection for applications in medical patient-care areas where UL 60601-1 listed medical electrical equipment is required. - Built-in isolation transformer with Faraday shield offers full isolation and removes common mode noise while maintaining full AC surge suppression in all modes. - Line-interactive voltage regulation corrects brownouts and overvoltages from 81 to 143 volts back to usable 120V output levels, without using battery power. - Hospital-grade plug and outlets offer added degree of safety and reliability to input/output connections. - Full line isolation offers a higher degree of safety and prevents operational problems in sensitive electronic equipment. - Resistant to electrostatic discharge. - Supports loads up to 700VA/450 watts. - 42 minutes half load runtime (with 350VA load), 18 minutes full load runtime (with 700VA load). - 4 protected hospital-grade outlets; 6-ft. cord. - RS-232 and USB monitoring ports for remote monitoring and unattended shutdown. - PowerAlert unattended shutdown software available via free download from www.tripplite.com (cabling included). - Complete surge protection, line isolation and EMI/RFI noise filtering. - 5 diagnostic LEDs indicate AC present, on battery, voltage correction, overload & battery low/replace. - Battery replacement door. - Grounding lug.
Products specifications
Attribute name | Attribute value |
---|
Master (outer) case weight | 45.4 lbs |
Width | 7.5" |
Weight | 44.3 lbs |
Master (outer) case length | 13" |
Master (outer) case width | 11.2" |
Master (outer) case height | 17" |
Country of Origin | China |
Depth | 9.5" |
Height | 12.5" |
Response Time | 4 ms |
Battery Recharge Time | 4 h |
Cable Length | 70.9" |
Certification | CE, GOST, SASO, FCC Part 15 Category A, ROHS |
Form factor | Tower |
Product color | White |
Output power | 0 - 590551.2" |
LED indicators | Y |
Audible alarm(s) | Y |
Surge energy rating | 480 J |
Dimensions (WxDxH) | 7.48 x 9.02 x 12.8" |
Package width | Universal |
Package weight | 45.4 lbs |
Package height | 17" |
Package depth | 13" |
Quantity per master (outer) case | 1 pc(s) |
Output connections | 4 x 5-15R |
Input connection type | 5-15P |
Package dimensions (WxDxH) | 11.7 x 13.5 x 18.3" |
Nominal output voltage | 120 V |
USB 2.0 ports quantity | 1 |
Serial ports quantity | 1 |
Output power capacity | 0.75 kVA |
Nominal input voltage | 120 V |
Operating temperature (T-T) | 0 - 40 °C |
Storage temperature (T-T) | -15 - 50 °C |
Operating relative humidity (H-H) | 0 - 95 % |
Typical backup time at full load | 18 min |
Typical backup time at half load | 42 min |
Hot-swap battery | Y |