Tripp Lite SmartPro Medical-Grade UPS, Line Interactive, Lithium Battery, 6 Outlets - 230V, 700VA, 450W, Full Isolation1

Tripp Lite SmartPro Medical-Grade UPS, Line Interactive, Lithium Battery, 6 Outlets - 230V, 700VA, 450W, Full Isolation

Tripp Lite SmartPro Medical-Grade UPS, Line Interactive, Lithium Battery, 6 Outlets - 230V, 700VA, 450W, Full Isolation. UPS topology: Line-Interactive, Output power capacity: 0.7 kVA, Output power: 450 W. AC outlet types: C13 coupler, Power plug: C14 coupler, AC outlets quantity: 6 AC outlet(s). Typical backup time at full load: 14.5 min, Typical backup time at half load: 36 min. Form factor: Tower, Product color: Gray, Housing material: Polyvinyl chloride (PVC). Width: 7.5" (190.5 mm), Depth: 9.05" (229.9 mm), Height: 12.7" (322.6 mm)

Manufacturer: Tripp Lite

Availability: Out of Stock - on backorder and will be dispatched once in stock.

SKU: 5392195

Manufacturer part number: SMX700HGL

UPC: 0037332224804

MSRP: $2,824.64

Price: $2,043.95

Qty:

700VA/450W Medical-Grade UPS Allows Time to Back Up Critical Files During a Blackout
This 230V SmartPro® hospital-grade UPS is fully compliant with UL 60601-1 regulations when plugged into a hospital-grade outlet, which makes it ideal for use in medical facilities, including patient care vicinities. It allows you to work through short power failures, and gives you enough time to safely save files and shut down your system in case of a prolonged blackout.
Long-Lasting LiFePhos Battery Handles up to 10,000 Cycles with Ease
This UPS system for hospitals contains a replaceable lithium iron phosphate (LiFePhos) internal battery that provides up to 30 times the cycle life of traditional sealed lead acid (SLA) batteries. The 6-outlet UPS system provides up to 42 minutes of battery backup at half load and 18 minutes at full load. During normal operation, incoming utility power keeps the replaceable internal battery fully charged, so backup power will always be available.
Automatic Voltage Regulation (AVR) Corrects Potentially Hazardous Voltage Fluctuations
AVR protects your equipment from incremental hardware damage, data loss and performance problems caused by brownouts. This UPS for medical equipment can correct brownouts as low as 155V and overvoltages as high as 274V back to nominal 230V power without drawing on the battery backup needed to support your equipment during a blackout.
Built-In Isolation Transformer Offers Full Isolation
The isolation transformer with Faraday shield offers full isolation and removes common mode noise while maintaining full AC surge suppression in all modes. Cumulative leakage current of all connected equipment is less than 100 microamps.
Connect Your Equipment to 6 IEC 320 C13 Outlets
Six C13 hospital-grade outlets provide both battery backup and surge protector for your mobile medical equipment, such as computers, monitors and lab equipment. A 340-joule surge suppression rating protects connected components from the harmful effects of power surges.
Combats Electromagnetic Interference That Can Harm Equipment
Various electromagnetic and radio sources found in virtually every home and business can cause disruptive interference on the AC line. Known as EMI (electromagnetic interference) and RFI (radio frequency interference), this line noise is a common cause of performance problems and can lead to incremental hardware damage, data corruption and audio/video transmission problems. This medical-grade UPS system incorporates technology that filters out disruptive line noise so that it won’t affect your equipment.
Easy-to-Read LEDs and Alarm Report Real-Time UPS and Power Status
Front-panel LED indicators monitor essential information, such as line power, battery power, overload, voltage regulation and battery low/replace status. An audible alarm will sound in case of low battery, excessive load and power failure.
Saves Your Files, Even When You’re Away
USB and DB9 serial ports connect to your computer with the included cables. These ports communicate with Tripp Lite’s free downloadable PowerAlert® software for safe, unattended system shutdown and file saves in the event of a prolonged power failure.
Tower Form Factor for Easy Placement on a Nurse’s Station or Mobile Medical Cart
The long-lasting PVC housing fits easily on a desktop, shelf or anywhere else power is needed. The 15-centimeter (six-inch) dongle with hospital-grade C14 plug connects to a properly grounded AC wall outlet.
Typical Application ● Protect your medical electronics against power surges, brownouts and blackouts in patient care vicinities ● Operate essential equipment during short-term power outages using battery backup power ● Shut down PCs, monitors, mobile medical components and other equipment without data loss during long-term power outages ● Lithium battery backup allows time to save files and safely shut down during blackouts ● 6 C13 hospital-grade (HG) outlets provide power to medical equipment ● UL 60601-1 compliant for use in patient care vicinities when plugged into HG wall outlet ● Alarm and front-panel LEDs report online, battery, fault and overload conditions ● 10,000-cycle LiFePhos battery lasts up to 30x longer than comparable SLA batteries Package Includes ● SMX700HGL 700VA/450W SmartPro Medical-Grade UPS, Tower ● USB monitoring cable, 1.8 m ● DB9 serial monitoring cable, 1.8 m ● Owner’s manual

Lithium battery backup allows time to save files and safely shut down during blackouts
6 C13 hospital-grade (HG) outlets provide power to medical equipment
Approved for use within the Patient Care Vicinity
Approved to EN60601-1-2:2015, 4th Edition
Alarm and front-panel LEDs report online, battery, fault and overload conditions
10,000-cycle LiFePO4 battery lasts up to 30x longer than comparable SLA batteries

Overview
Specifications
Contact Us

Lithium battery backup allows time to save files and safely shut down during blackouts
6 C13 hospital-grade (HG) outlets provide power to medical equipment
Approved for use within the Patient Care Vicinity
Approved to EN60601-1-2:2015, 4th Edition
Alarm and front-panel LEDs report online, battery, fault and overload conditions
10,000-cycle LiFePO4 battery lasts up to 30x longer than comparable SLA batteries

Products specifications

Attribute name	Attribute value
Depth	9.05"
Height	2.19 oz
Width	7.5"
Weight	31.5 lbs
Housing Material	Polyvinyl chloride (PVC)
Master (outer) case height	18.5"
Country of Origin	China
UPS topology	Line-Interactive
Serial interface	Y
Master (outer) case weight	34.8 lbs
Master (outer) case length	13.4"
Master (outer) case width	12.2"
Number of input phases	1
Design
Certification	CE, UL60601-1
Form factor	Tower
Technical details
Product color	Gray
Features
Output power	0 - 590551.2"
Surge energy rating	NEMA 5-20P
Input operation voltage (min)	230 V
Input operation voltage (max)	85078000
Output operation voltage (min)	220 V
Output operation voltage (max)	240 V
Waveform	Sine
Packaging data
Package weight	34.8 lbs
Package depth	13.4"
Package height	18.5"
Package width	12.2"
Logistics data
Quantity per master (outer) case	1 pc(s)
Ports & interfaces
AC outlets quantity	6 AC outlet(s)
AC outlet types	C13 coupler
Power plug	C14 coupler
USB port	Y
Power
Output power capacity	0.7 kVA
Maximum current	10 A
Operational conditions
Operating temperature (T-T)	32 - 104 °C
Storage temperature (T-T)	5 - 122 °C
Operating relative humidity (H-H)	0 - 95 %
Battery
Typical backup time at full load	37.1 min
Typical backup time at half load	36 min

Your name *

Your email *

Enquiry *

Products specifications

Attribute name	Attribute value
Depth	9.05"
Height	2.19 oz
Width	7.5"
Weight	31.5 lbs
Housing Material	Polyvinyl chloride (PVC)
Master (outer) case height	18.5"
Country of Origin	China
UPS topology	Line-Interactive
Serial interface	Y
Master (outer) case weight	34.8 lbs
Master (outer) case length	13.4"
Master (outer) case width	12.2"
Number of input phases	1
Design
Certification	CE, UL60601-1
Form factor	Tower
Technical details
Product color	Gray
Features
Output power	0 - 590551.2"
Surge energy rating	NEMA 5-20P
Input operation voltage (min)	230 V
Input operation voltage (max)	85078000
Output operation voltage (min)	220 V
Output operation voltage (max)	240 V
Waveform	Sine
Packaging data
Package weight	34.8 lbs
Package depth	13.4"
Package height	18.5"
Package width	12.2"
Logistics data
Quantity per master (outer) case	1 pc(s)
Ports & interfaces
AC outlets quantity	6 AC outlet(s)
AC outlet types	C13 coupler
Power plug	C14 coupler
USB port	Y
Power
Output power capacity	0.7 kVA
Maximum current	10 A
Operational conditions
Operating temperature (T-T)	32 - 104 °C
Storage temperature (T-T)	5 - 122 °C
Operating relative humidity (H-H)	0 - 95 %
Battery
Typical backup time at full load	37.1 min
Typical backup time at half load	36 min

Product tags

(61569)