Tripp Lite SMX700HG uninterruptible power supply (UPS) 0.7 kVA 450 W 6 AC outlet(s)

Tripp Lite SMX700HG. Output power capacity: 0.7 kVA, Output power: 450 W, Input operation voltage (min): 220 V. AC outlet types: C13 coupler, Power plug: C14 coupler, AC outlets quantity: 6 AC outlet(s). Typical backup time at full load: 14.5 min, Typical backup time at half load: 36 min, Battery recharge time: 3.6 h. Form factor: Tower, Product color: White, Housing material: Polyvinyl chloride (PVC). Width: 7.5" (190.5 mm), Depth: 9.05" (229.9 mm), Height: 12.7" (322.6 mm)
Manufacturer: Tripp Lite
Availability: Out of Stock - on backorder and will be dispatched once in stock.
SKU: 4892892
Manufacturer part number: SMX700HG
UPC: 0037332140418
MSRP: $1,231.36
$889.26
Tripp Lite’s SMX700HG medical-grade UPS system provides dependable battery backup and is fully compliant with UL 60601-1 regulations when plugged into a hospital-grade outlet, making it ideal for use in patient-care vicinities. The 700VA/450W capacity provides up to 36 minutes of runtime for a half load, or 14.5 minutes for a full load so you can work through short power failures and perform an orderly system shutdown in a prolonged blackout. Built-in line-interactive voltage regulation corrects brownouts as low as 155V and overvoltages as high as 274V to normal 230V nominal output, without drawing battery power. The SMX700HG’s built-in isolation transformer with Faraday shield offers full isolation and removes common mode noise while maintaining full AC surge suppression in all modes. Cumulative leakage current of all connected equipment is less than 100 microamps. This UPS system features six IEC320 C13 hospital-grade outlets and has a hospital-grade IEC320 C14 plug on a 15 cm (6 in.) dongle. All six outlets provide both backup protection and surge protection, rated to 340 joules. The SMX700HG also features diagnostic LEDs, as well as a USB port and a DB9 serial port that work with Tripp Lite’s free downloadable PowerAlert software for safe, unattended system shutdown and file saves in the event of a prolonged power failure. Application Usage This UPS contains a lead acid battery designed to be connected continuously to an AC power source, except during brief power outages. It is not intended for frequent charge/discharge cycles, such as mobile cart applications where the UPS is often disconnected from the power source. Using the SMX700HG in this type of application will void the battery warranty.
Provides Ideal UPS Backup in Healthcare Facilities Compliant with UL 60601-1 standards for use in patient-care vicinities, when plugged into a hospital-grade outlet Built-in isolation transformer with Faraday shield offers full isolation and removes common mode noise Battery Backup and Full Surge Protection 36 minutes runtime for half load (225W); 14.5 minutes for full load (450W) All six hospital-grade outlets provide surge protection rated to 340 joules EMI/RFI noise filtering ensures equipment runs smoothly without line noise interference Resistant to electrostatic discharge LEDs and Audible Alarms Keep You Aware of Power Status Indicator lights on the front of the unit show you when the UPS is on and supplying utility power, when operating in voltage correction mode or in battery mode, relative load level and low-battery warning Audible alarms alert you to power failure, overload and low battery conditions; the alarm’s mute/quiet mode ensures patients are not disturbed Saves Your Files, Even When You’re Away Works with Tripp Lite PowerAlert software (available as a free download) to enable safe, unattended system shutdown and files saves during prolonged power failures Connects to your computer via either the DB9 port or USB port

 

  • Supports a half load up to 36 minutes; full load up to 14.5 minutes
  • Six IEC320 C13 hospital-grade outlets and IEC320 C14 hospital-grade plug
  • Leakage current less than 100 microamps
  • Approved for use within the Patient Care Vicinity
  • Approved to EN60601-1-2:2015, 4th Edition
  • 340 joule surge suppression rating protects connected equipment
  • Alarm mute/alarm quiet control is ideal for use around patients
Tripp Lite’s SMX700HG medical-grade UPS system provides dependable battery backup and is fully compliant with UL 60601-1 regulations when plugged into a hospital-grade outlet, making it ideal for use in patient-care vicinities. The 700VA/450W capacity provides up to 36 minutes of runtime for a half load, or 14.5 minutes for a full load so you can work through short power failures and perform an orderly system shutdown in a prolonged blackout. Built-in line-interactive voltage regulation corrects brownouts as low as 155V and overvoltages as high as 274V to normal 230V nominal output, without drawing battery power. The SMX700HG’s built-in isolation transformer with Faraday shield offers full isolation and removes common mode noise while maintaining full AC surge suppression in all modes. Cumulative leakage current of all connected equipment is less than 100 microamps. This UPS system features six IEC320 C13 hospital-grade outlets and has a hospital-grade IEC320 C14 plug on a 15 cm (6 in.) dongle. All six outlets provide both backup protection and surge protection, rated to 340 joules. The SMX700HG also features diagnostic LEDs, as well as a USB port and a DB9 serial port that work with Tripp Lite’s free downloadable PowerAlert software for safe, unattended system shutdown and file saves in the event of a prolonged power failure. Application Usage This UPS contains a lead acid battery designed to be connected continuously to an AC power source, except during brief power outages. It is not intended for frequent charge/discharge cycles, such as mobile cart applications where the UPS is often disconnected from the power source. Using the SMX700HG in this type of application will void the battery warranty.
Provides Ideal UPS Backup in Healthcare Facilities Compliant with UL 60601-1 standards for use in patient-care vicinities, when plugged into a hospital-grade outlet Built-in isolation transformer with Faraday shield offers full isolation and removes common mode noise Battery Backup and Full Surge Protection 36 minutes runtime for half load (225W); 14.5 minutes for full load (450W) All six hospital-grade outlets provide surge protection rated to 340 joules EMI/RFI noise filtering ensures equipment runs smoothly without line noise interference Resistant to electrostatic discharge LEDs and Audible Alarms Keep You Aware of Power Status Indicator lights on the front of the unit show you when the UPS is on and supplying utility power, when operating in voltage correction mode or in battery mode, relative load level and low-battery warning Audible alarms alert you to power failure, overload and low battery conditions; the alarm’s mute/quiet mode ensures patients are not disturbed Saves Your Files, Even When You’re Away Works with Tripp Lite PowerAlert software (available as a free download) to enable safe, unattended system shutdown and files saves during prolonged power failures Connects to your computer via either the DB9 port or USB port

 

  • Supports a half load up to 36 minutes; full load up to 14.5 minutes
  • Six IEC320 C13 hospital-grade outlets and IEC320 C14 hospital-grade plug
  • Leakage current less than 100 microamps
  • Approved for use within the Patient Care Vicinity
  • Approved to EN60601-1-2:2015, 4th Edition
  • 340 joule surge suppression rating protects connected equipment
  • Alarm mute/alarm quiet control is ideal for use around patients
Products specifications
Attribute nameAttribute value
Depth9.05"
Height2.19 oz
Battery Recharge Time3.6 h
Width7.5"
Weight42.1 lbs
Housing MaterialPolyvinyl chloride (PVC)
Country of OriginChina
Response Time5 ms
Input Frequency50/60 Hz
Cable Length72"
EMI/RFI noise filteringY
Cold startY
Design
CertificationCE/IEC 60601-1, FCC B
Form factorTower
Technical details
Product colorWhite
Sustainability certificatesRoHS
Features
Output power0 - 590551.2"
Surge energy ratingNEMA 5-20P
Output operation voltage (min)85078000
Output operation voltage (max)Y
Cooling typeActive
LED indicatorsY
Audible alarm(s)Y
Input operation voltage (min)220 V
Input operation voltage (max)240 V
Packaging data
Package weight45.4 lbs
Package depth13.4"
Package height18.5"
Package width12.2"
Logistics data
Quantity per master (outer) case1 pc(s)
Other features
Package dimensions (WxDxH)12.2 x 13.4 x 18.5"
Ports & interfaces
AC outlets quantity6 AC outlet(s)
AC outlet typesC13 coupler
RS-232 ports1
USB 2.0 ports quantity1
Power plugC14 coupler
Power
Maximum current3.6 A
Output power capacity0.7 kVA
Nominal input voltage230 V
Operational conditions
Operating temperature (T-T)0 - 40 °C
Storage temperature (T-T)-15 - 50 °C
Operating relative humidity (H-H)0 - 95 %
Battery
Typical backup time at full load37.1 min
Typical backup time at half load36 min
Hot-swap batteryY
*
*
*
Products specifications
Attribute nameAttribute value
Depth9.05"
Height2.19 oz
Battery Recharge Time3.6 h
Width7.5"
Weight42.1 lbs
Housing MaterialPolyvinyl chloride (PVC)
Country of OriginChina
Response Time5 ms
Input Frequency50/60 Hz
Cable Length72"
EMI/RFI noise filteringY
Cold startY
Design
CertificationCE/IEC 60601-1, FCC B
Form factorTower
Technical details
Product colorWhite
Sustainability certificatesRoHS
Features
Output power0 - 590551.2"
Surge energy ratingNEMA 5-20P
Output operation voltage (min)85078000
Output operation voltage (max)Y
Cooling typeActive
LED indicatorsY
Audible alarm(s)Y
Input operation voltage (min)220 V
Input operation voltage (max)240 V
Packaging data
Package weight45.4 lbs
Package depth13.4"
Package height18.5"
Package width12.2"
Logistics data
Quantity per master (outer) case1 pc(s)
Other features
Package dimensions (WxDxH)12.2 x 13.4 x 18.5"
Ports & interfaces
AC outlets quantity6 AC outlet(s)
AC outlet typesC13 coupler
RS-232 ports1
USB 2.0 ports quantity1
Power plugC14 coupler
Power
Maximum current3.6 A
Output power capacity0.7 kVA
Nominal input voltage230 V
Operational conditions
Operating temperature (T-T)0 - 40 °C
Storage temperature (T-T)-15 - 50 °C
Operating relative humidity (H-H)0 - 95 %
Battery
Typical backup time at full load37.1 min
Typical backup time at half load36 min
Hot-swap batteryY
Product tags
  • (55436)